重慶升降機定位裝置,，包括液壓站、油管,、測壓裝置,、油缸定位裝置,、撞塊，液壓站,、油管,、測壓裝置和油缸定位裝置安裝在升降機升降平臺上，所述撞塊安裝在升降機鋼結構上,；液壓站包括油泵,、油箱,、溢流閥、電磁換向閥,，所述油泵進油口聯接油箱,，出油口依次聯接溢流閥、電磁換向閥,；油缸定位裝置包括撞盤,、銷軸、導向支架,、定位導向桿,、連接塊、液壓缸,、支架,。撞盤采用圓形可滾動形式，與撞塊的凹槽接觸,，限制升降機升降平臺上下移動,。本實用新型采用液壓系統驅動，在壓力過大時,，可通過溢流閥溢流,，過載保護性能良好，延長部件使用壽命,；撞盤采用圓形可滾動端頭,，可以使撞盤與撞塊脫開容易，提高了可靠性,，適用于巷道堆垛類和平面移動類機械停車設備,。
Hangzhou lifting platform positioning device, including hydraulic station, tubing, pressure equipment, cylinder positioning device, hit the block, hydraulic station, tubing, pressure device and cylinder positioning device mounted on the elevator lifting platform, hit the block is installed in the lift steel structure; hydraulic station, including pumps, tanks, pressure relief valve,solenoid valve, the pump inlet connecting the tank, the oil port in turn joins relief valve, solenoid valve; cylinder positioning device comprises a collision plate, pin axis, the guide bracket,positioning the guide rod, connection blocks, hydraulic cylinders, bracket. Hit the plate with a circular scroll form, hit the block in contact with the groove, limiting the lifting platform lifts up and down movement. The utility model is driven by hydraulic system, the pressure is too large, it can overflow through the relief valve, good overload performance, longer component life; hit the plate with a circular scroll ends, you can make hit off the plate and hit the block easy to open, improved reliability, suitable for mobile laneway type and flat type mechanical parking equipment.

升降機止動塊配置，主要包括升降機轎廂,、在升降機轎廂的一側上的轎廂導軌,、升降機井或等價物、附連到轎廂導軌或升降機井或等價物的至少一個止動塊,、附連到升降機轎廂的至少兩個可移動止動塊,，可移動止動塊被布置為相對于升降機井方向橫向移動進入與附連到轎廂導軌或升降機井或等價物的至少一個止動塊對準的位置或從所述與所述止動塊對準的位置離開。附連到升降機轎廂的至少兩個可移動止動塊通過水平軸連接到彼此,，用于同步可移動止動塊的運動,，該水平軸被定位為大致沿平行于升降機轎廂在轎廂導軌側上的壁的方向取向。
Hangzhou lifting platform stopper configuration, including an elevator car, the elevator car on the side of the cage guide rail, the elevator shaft or equivalent, attached to the car guide rails or elevator shaft or equivalent, at least one stopper, attached to the elevator car at least two movable stop blocks, the movable stop blocks arranged to stop at least one lateral direction relative to the elevator shaft is moved into and attached to the car guide rails or elevator shaft or equivalent moving block or away from a position aligned with said stop blocks aligned position. Attached to the elevator car at least two movable stop blocks connected to each other by a horizontal axis, the movable stopper is used to synchronize the movement of the movable block,the horizontal axis is positioned substantially parallel to the elevator car in the car guide rails oriented in the direction of the side wall.