泄漏是目前重慶貨梯壓系統時常發生的故障現象，液體在液壓元件和管路中流動時產生壓力差及各元件存在間隙等原因會引起泄漏,。另外,，惡劣工況條件也會對工升降貨梯的密封產生一定的影響。Leakage is the current Zhejiang cargo pressure system is often the failure of the system, the liquid flow in the hydraulic components and pipelines to produce pressure difference and the various components of the gap and other reasons will cause leakage. In addition, the bad working conditions will also have a certain effect on the seal of the elevator.

重慶貨梯液壓系統一旦發生泄漏,，將會導致系統壓力無法建立,，同時，液壓油泄漏還會造成環境污染,，影響生產甚至產生無法估計的嚴重后果,。Zhejiang cargo ladder hydraulic system once the leak will cause the system pressure can not be established, at the same time, the hydraulic oil leakage will cause environmental pollution, affect the production and even produce can not estimate the serious consequences.

相信很多重慶貨梯人士都曾有過這樣的困惑，浙江貨梯液壓系統泄漏,，我們?cè)撛趺崔k,？I believe that many people in Zhejiang who have had such a confusion, Zhejiang cargo ladder hydraulic system leak, how should we do?

在重慶貨梯設計和加工環節中要充分考慮影響泄漏的重要因素密封溝槽的設計和加工。另外,，密封件的選擇也是非常重要的，如果不在最初全面考慮泄漏的影響因素,，將會給以后的生產中帶來無法估量的損失,。選擇正確的裝配和修理方法，借鑒以往的經驗,。In the design and processing of goods in Zhejiang, the important factors that affect the leakage are fully considered. In addition, the selection of seals is also very important, if not in the initial comprehensive consideration of the impact of the leak, will bring immeasurable losses to the future production. Choose the correct assembly and repair methods, drawing on the experience of the past.

在重慶貨梯密封圈的裝配中盡量采用專用工具,、并且在密封圈上涂一些潤滑脂。在液壓油的污染控制上,，要從污染的源頭人手,，加強污染源的控制，還要采取有效的過濾措施和定期的油液質量檢查,。為有效的切斷外界因素（水,、塵埃,、顆粒等）對液壓油缸的污染，可加一些防護措施等,。Use special tools as far as possible in the assembly of the Zhejiang cargo ladder sealing ring, and apply some grease to the sealing ring. In the pollution control of hydraulic oil, from the source of pollution, to strengthen the control of pollution sources, but also to take effective filtering measures and regular oil quality inspection. To effectively cut off the external factors (water, dust, particles, etc.) on the hydraulic cylinder pollution, can add some protection measures, etc..