升降機使用中會出現一些小問題，這些小問題一定要及時找出原因并盡快排除，否則就會影響升降機的正常工作。那么升降平臺抖動主要有哪些原因呢？

1、載重面較大，貨物的重心一定會有所偏移，加之大臺面的設備一般需要配備3個以上的油缸。由于平臺的重心問題，所以使油缸受力不均，液壓油的入油回油速度必然產生不等。這樣平臺就可能出現抖動或臺面傾斜。
Hangzhou lift platform truck surface is larger, the center of gravity of the goods will be offset, coupled devices generally require large table with three or more cylinders. Since the center of gravity of the issue platform, so uneven force of the cylinder, hydraulic oil into the oil return rate inevitably produce unequal. Such a platform may occur shake or tilt the table.

2、升降平臺油質不良也會使油管泵站油缸內的壓力不平衡，也會引起臺面的問題。或長時間使用的油質產生問題，或油質中混入了別的東西。油質變壞后，油管內可以產生微量的堵塞，這樣油缸內的壓力就不一樣，升降速度也一定受影響。
Hangzhou lifting platform also cause adverse pressure oil pipeline pumping station tanks imbalance can also cause problems countertops. Oily or prolonged use of a problem, or oil mixed with something else. After the oil qualitative bad, can produce micro tubing blockage, the pressure inside the cylinder so that is not the same, lifting speed will certainly be affected.

3、電源電壓不符合升降機運轉需要，繼電器會出現間斷接觸現象，導致升降機升降間斷，應及時調整輸入電壓，升降機的轉動部分潤滑不夠也會導致抖動的現象。
Hangzhou lifting platform lifts operating supply voltage does not meet the needs of the relay contact phenomena occur intermittently, causing intermittent lift lifting, should adjust the input voltage, the lift will lead to insufficient lubrication of rotating part of the phenomenon of jitter.